Black Industrial Lantern | Outdoor and Bathroom Light

The standard outdoor lantern receives a moody monochrome makeover, providing a distinctive alternative to the white and galvanised options. Perfect for a darker scheme or to provide contrast against lighter interiors. Cast from aluminium and finished by hand, the lantern can be used for bathroom and outdoor use and is rated to IP54 if correctly installed.

The fixing/wiring entry in the top is M20 female threaded to a depth of 18mm. The clear glass dome is secured to the upper section by an aluminum ring, secured by three screws. The glass is ingress protected by a robust rubber gasket.

The lamp holder takes a standard E27 (ES/Screw) bulb. The lantern can be fitted with Factorylux Eco-Filament pear or LED-Filament pear light bulbs; low energy light bulbs (compact fluorescent or LED) up to a maximum of 13W; and traditional filament light bulbs up to 60W. The internal diameter of the glass dome is approx 85mm.

There are several installation options including:

• direct fixing to male threaded conduit tube, conduit swan neck or other male threaded conduit fittings


• non-IP rated installation as a pendant light using a 20mm threaded cable clamp or conduit hook


• IP-rated installation as a pendant light with: a 20mm cable gland - not included but available here; an IP rated lighting pattress; and round cable

All outdoor/bathroom installations should be undertaken by a qualified contractor.